1. By loosening handle (A) the faceplate can adjust forward or backward and can rotate 360*. 2. Handle (B) is loosened to extend the mounting clamp (E). When the mounting clamp (E) is inserted in the slot cut in the back of the manikin it can be tightened against the face plate (F) to secure manikin on the stand. This can be done quickly and easily by one person in a matter of seconds - on and off the stand. 3. Where needed the mounting clamp (E) can be completely removed from the stand and the manikin can be secured to the faceplate (F) by screws through the faceplate. 4. By loosening handle (C) the top mechanism can tilt completely forward or backward so that the faceplate is straight up or straight down. 5. By loosening handle (D) the entire top unit (from C up) can telescope upward or downward. 6. Bottom plate (G) can be bolted to ¾" plywood bottom or welded to metal bottom or bolted to the floor.
